Bridesmaids

DIY HTV Best Bridesmaid Ever Tote Bags

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

DIY HTV Iron On Best Bridesmaid Ever Getting Ready Wedding Tote Bags #svgfiles #totebags #bridesmaidgifts

Who doesn’t love tote bags when it comes to Bridesmaid Gifts, they are so useful and perfect for overnight bags and storing toiletries and extras for your wedding day! To go with the other Tote Bags we’ve made, these Best Bridesmaid Ever Totes are great and affordable swag for all your girls!

DIY HTV Iron On Best Bridesmaid Ever Getting Ready Wedding Tote Bags #svgfiles #totebags #bridesmaidgifts

In keeping with our Valentine’s Day Coloring right now, I made mine on Pink Tote Bags with Gold Confetti HTV but I would almost repeat the project with non glitter HTV to help with visibility on the bags in the future

DIY HTV Iron On Best Bridesmaid Ever Getting Ready Wedding Tote Bags #svgfiles #totebags #bridesmaidgifts

I made a total of 4 different bags so you could have one for each of your leading ladies: bridesmaid, maid of honor, mother of the bride and mother of the groom. You can easily customize these for getting ready bags in whatever colors you like, and they are perfect for storing your girl’s clothes when the are getting ready and in their dresses for the wedding!

staged 4 with text.jpgDIY HTV Iron On Best Bridesmaid Ever Getting Ready Wedding Tote Bags #svgfiles #totebags #bridesmaidgifts

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit the Tote Bags the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design(s) in your choice of heat transfer vinyl (I used Gold Confetti Glitter HTV) with the Iron On (for Easyweed Vinyl) or Iron On+ (for Glitter Vinyl) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.

1. placement with text.jpgDIY HTV Iron On Best Bridesmaid Ever Getting Ready Wedding Tote Bags #svgfiles #totebags #bridesmaidgifts

4. Iron your Tote Bag to remove any creases, then arrange the design in the center of the tote bag, using the handles as a guide . Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

2. ironing with text.jpgDIY HTV Iron On Best Bridesmaid Ever Getting Ready Wedding Tote Bags #svgfiles #totebags #bridesmaidgifts

5. Set your Iron to the second Highest setting and press the the iron down firmly on the design, not ironing but rather using it as a small heat press. I worked from the upper left to lower right on the design, pressing the iron on each part of the design for at least 30 seconds, then overlapping the last position as you move the iron across the design.

3. backing removal with text.jpgDIY HTV Iron On Best Bridesmaid Ever Getting Ready Wedding Tote Bags #svgfiles #totebags #bridesmaidgifts

6. Remove the backing from the design, leaving the design on the Tote Bag. Repeat with all the remaining Tote Bags.

DIY HTV Iron On Best Bridesmaid Ever Getting Ready Wedding Tote Bags #svgfiles #totebags #bridesmaidgifts
instagram 1 - with text.jpgDIY HTV Iron On Best Bridesmaid Ever Getting Ready Wedding Tote Bags #svgfiles #totebags #bridesmaidgifts

Monogram HTV Iron On Koozies

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

DIY Iron On Monogrammed Koozies #cricutprojects #cricut #koozies #monogram

With all the fun I’ve had putting monograms on Tank Tops and Tote Bags, I decided to include koozies in the mix since its such an easy project if you have a little extra HTV lying around, and in my case I also had some extra koozies! Like the other monogram projects, you can easily design them in the Cricut Craft Cutter Software and size them however you like for your koozie. :)

DIY Iron On Monogrammed Koozies #cricutprojects #cricut #koozies #monogram

Supplies:
Blank Koozies
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat

Designing Your Monogram:

1. First, if you don't already own a Monogram style font, download one. The font I used is called Free Monogram Font from DaFont.com and it worked perfectly for what I wanted, and as the name implies its totally free!

2. Now, open a new project in your Cricut design software and create a text box. Select the Monogram font from your font choices and use it to type the initials for your monogram.

DIY Iron On Monogrammed Koozies #cricutprojects #cricut #koozies #monogram

3. If you are using the font I mentioned, for smaller side letters you use lower case letters and for the center letter you use uppercase letters. For example, my initials on the monogram shown are typed in as "aCl" .

DIY Iron On Monogrammed Koozies #cricutprojects #cricut #koozies #monogram

4. Next, overlap your letters by changing the letter spacing of your font. I chose -2 for the spacing of my letters but it is better to mess with it a little bit to find out what looks best to you.

DIY Iron On Monogrammed Koozies #cricutprojects #cricut #koozies #monogram

5. Once all your letters are spaced to your satisfaction, select the "Weld" tool to combine your letters into a single set of cutting curves. 

DIY Iron On Monogrammed Koozies #cricutprojects #cricut #koozies #monogram

6. Now,  you can size your monogram to whatever size you like best; I made them 3" wide.

7. Finally, cut the monograms on your choice of vinyl. I used the Iron On+ setting for Glitter HTV and the Standard Iron On Setting for regular Easyweed Vinyl. Make sure that you select the "Mirror" Function and load your Iron On material Shiny side down so that your design cuts correctly! :)

Transferring your Design

8. Once your design is cut, weed away the extra material, leaving only your monogram.

9. Arrange the Monogram such that it is in the center of the koozie. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

DIY Iron On Monogrammed Koozies #cricutprojects #cricut #koozies #monogram

10. Set your Iron to the second Highest setting and press the the iron down firmly on the design, not ironing but rather using it as a small heat press. I worked from the upper left to lower right on the design, pressing the iron on each part of the design for about 20 seconds, covering the entire design and parchment paper.

DIY Iron On Monogrammed Koozies #cricutprojects #cricut #koozies #monogram

11. Remove the backing from the design, leaving the Monogram on the Koozie. Repeat with all the remaining Koozies.

DIY Iron On Monogrammed Koozies #cricutprojects #cricut #koozies #monogram
DIY Iron On Monogrammed Koozies #cricutprojects #cricut #koozies #monogram

Future Mrs. Bachelorette Flasks

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

DIY Vinyl Cheer Bitches Bachelorette Party Flasks #bachelorette #cricutprojects #diywedding

More Bachelorette party flasks are here! :) I had so much fun when I first started designing different flasks, I ended up with a whole bunch of different designs that I’ll be publishing every few weeks and will be continuing to design more so there are oodles of options!

DIY Vinyl Cheer Bitches Bachelorette Party Flasks #bachelorette #cricutprojects #diywedding

For these flasks, weeding is what you need to be careful of as both types of text are more delicate than some of the bolder fonts, but the results are well worth it! Just be patient and you shouldn’t have any difficulties. :)

DIY Vinyl Cheer Bitches Bachelorette Party Flasks #bachelorette #cricutprojects #diywedding

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. 

2. Cut the design(s) in your choice of permanent adhesive vinyl with the Vinyl Setting on your Cricut. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so by BLAH

DIY Vinyl Cheer Bitches Bachelorette Party Flasks #bachelorette #cricutprojects #diywedding

3. Once the designs are cut, weed away the extra vinyl and cut a piece of transfer taper to 3.5" x 5". Cut away any excess backing from the vinyl design and smooth transfer tape over the design, aligning it to the top of the text (i.e. the “Cheers” or “Future”) with 1 -1/2” block above the text, as shown below. Using the smoother tool, smooth the tape to the vinyl, removing any air bubbles. The transfer tape should overlap the backing of the design, so that you can stick the tape to an object with the backing still on the design.

DIY Vinyl Cheer Bitches Bachelorette Party Flasks #bachelorette #cricutprojects #diywedding

4. Now, transfer the design to your flask. If you are comfortable centering the designs you can remove the tape from the backing and directly place the design on the flask. If not, arrange the design to be centered on the flask before removing the backing, sticking it with the overlapping transfer tape.

DIY Vinyl Cheer Bitches Bachelorette Party Flasks #bachelorette #cricutprojects #diywedding

5. Once your design is placed to your satisfaction, carefully peel the tape off the backing, transferring the vinyl to the transfer tape while not unsticking it from the flask. Remove the backing then smooth the design onto the flask, once again using the smoother to remove any air bubbles.

DIY Vinyl Cheer Bitches Bachelorette Party Flasks #bachelorette #cricutprojects #diywedding
DIY Vinyl Cheer Bitches Bachelorette Party Flasks #bachelorette #cricutprojects #diywedding

6. Remove the transfer tape to leave the design on the flask, then repeat the process for all the additional flasks.

DIY Vinyl Cheer Bitches Bachelorette Party Flasks #bachelorette #cricutprojects #diywedding
DIY Vinyl Cheer Bitches Bachelorette Party Flasks #bachelorette #cricutprojects #diywedding
DIY Vinyl Cheer Bitches Bachelorette Party Flasks #bachelorette #cricutprojects #diywedding

 

 

DIY Iron On Bride Tribe Wedding Koozies

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

DIY Bride Tribe Iron On Wedding Koozies  #diywedding #koozies #bridetribe #cricutprojects

After making my Groomsman Brew Crew Koozies, I couldn’t leave the lovely ladies of the bridal party out of the koozie fun! So I started simple with some fun glittery Bride Tribe koozies. :)

DIY Bride Tribe Iron On Wedding Koozies  #diywedding #koozies #bridetribe #cricutprojects

I used a mix of Rose Gold Glitter HTV, Gold Confetti HTV, and Old Gold Easyweed HTV with a mix of white and black koozies and all of them turned out great! They are super easy to make and are perfect not only as bachelorette party favors but for bridesmaids proposals or any pre-wedding event. :)

DIY Bride Tribe Iron On Wedding Koozies  #diywedding #koozies #bridetribe #cricutprojects

Personally my favorite combination is below: with The Bride in Rose Gold Glitter on a white Koozie and the maids sporting Gold Confetti on black Bride Tribe Koozies; luckily there are dozens of color options so you can easily customize the colors to exactly what you want. :)

DIY Bride Tribe Iron On Wedding Koozies  #diywedding #koozies #bridetribe #cricutprojects

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit the tank tops the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design(s) in your choice of heat transfer vinyl (I used Rose Gold Glitter, Gold Confetti Glitter and Old Gold Easyweed HTV) with the Iron On (for Easyweed Vinyl) or Iron On+ (for Glitter Vinyl) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.

DIY Bride Tribe Iron On Wedding Koozies  #diywedding #koozies #bridetribe #cricutprojects

4. Center the design in the middle of the koozie. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

DIY Bride Tribe Iron On Wedding Koozies  #diywedding #koozies #bridetribe #cricutprojects

5. Set your Iron to the second Highest setting and press the the iron down firmly on the design, not ironing but rather using it as a small heat press. The koozie design should be completely covered by the iron. Pressing the iron on the design for 15 - 30 seconds, mine took only 20 seconds. :)

DIY Bride Tribe Iron On Wedding Koozies  #diywedding #koozies #bridetribe #cricutprojects

6. Remove the backing from the design, leaving the design on the koozie. Repeat with all the remaining koozies.

DIY Bride Tribe Iron On Wedding Koozies  #diywedding #koozies #bridetribe #cricutprojects
DIY Bride Tribe Iron On Wedding Koozies  #diywedding #koozies #bridetribe #cricutprojects
DIY Bride Tribe Iron On Wedding Koozies  #diywedding #koozies #bridetribe #cricutprojects
DIY Bride Tribe Iron On Wedding Koozies  #diywedding #koozies #bridetribe #cricutprojects
DIY Bride Tribe Iron On Wedding Koozies  #diywedding #koozies #bridetribe #cricutprojects

DIY Iron On Nautical Bachelorette Tank Tops

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

DIY Nautical Bachelorette Tank Tops #bachelorette #cricutprojects #feelingnauti #shipfaced

Whats better for a cruise bachelorette party than matching bridal party tank tops? :) I adored this design so much on tote bags I had to use it for tank tops as well and it looked great either way!

DIY Nautical Bachelorette Tank Tops #bachelorette #cricutprojects #feelingnauti #shipfaced

These are just as easy as their tote bag counter parts, and I adore the white and silver popping on darker, colorful tank tops! :)

IDIY Nautical Bachelorette Tank Tops #bachelorette #cricutprojects #feelingnauti #shipfaced

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit the tank tops the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design(s) in your choice of heat transfer vinyl (I used Silver Glitter HTV and White HTV) with the Iron On (for Easyweed Vinyl) or Iron On+ (for Glitter Vinyl) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.

DIY Nautical Bachelorette Tank Tops #bachelorette #cricutprojects #feelingnauti #shipfaced

4. Iron your tank top to remove any creases, then center the design over the top half of the tank top. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

DIY Nautical Bachelorette Tank Tops #bachelorette #cricutprojects #feelingnauti #shipfaced

5. Set your Iron to the second Highest setting and press the the iron down firmly on the design, not ironing but rather using it as a small heat press. I worked from the upper left to lower right on the design, pressing the iron on each part of the design for at least 30 seconds, then overlapping the last position as you move the iron across the design.

DIY Nautical Bachelorette Tank Tops #bachelorette #cricutprojects #feelingnauti #shipfaced

6. Remove the backing from the design, leaving the design on the tank top. Repeat with all the remaining tank tops.

DIY Nautical Bachelorette Tank Tops #bachelorette #cricutprojects #feelingnauti #shipfaced

Nothing like matching tank tops to keep all your brides-mates accounted for and ready to party! What designs would you make for bachelorette tank tops? :)

DIY Nautical Bachelorette Tank Tops #bachelorette #cricutprojects #feelingnauti #shipfaced

Feeling Nauti Bridesmaid Flasks

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

DIY Nautical Bachelorette Party Flasks #bachelorette #cricutprojects #shipfaced #feelingnauti

To go with our Feeling Nauti Tote Bags, I decided to also design a set of flasks along the same theme. After all, what better accessory for a bachelorette beach bag than a matching flask? :)

DIY Nautical Bachelorette Party Flasks #bachelorette #cricutprojects #shipfaced #feelingnauti

The big thing with these designs is to be careful wedding the bride’s “Shipfaced” flask, the words and outline are easy but the little details in the steering wheel can be a little tougher depending on how comfortable you are weeding vinyl. I didn’t need an extra, but since they don’t take that much vinyl to make I would recommend cutting an extra just in case. :)

DIY Nautical Bachelorette Party Flasks #bachelorette #cricutprojects #shipfaced #feelingnauti

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. 

2. Cut the design(s) in your choice of permanent adhesive vinyl with the Vinyl Setting on your Cricut. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so.

DIY Nautical Bachelorette Party Flasks #bachelorette #cricutprojects #shipfaced #feelingnauti

3. Once the designs are cut, weed away the extra vinyl and cut a piece of transfer taper to 3.5" x 5". I found that the Cricut transfer tape was easiest for this since its grid lines are in 1/2” segments. Cut away any excess backing from the vinyl design and smooth transfer tape over the design, aligning it along the bottom of the top word (“Feeling” or “Ship”) 1 1/2” from the top of your transfer tape (3 blocks down if you are using Cricut Transfer tape)Using the smoother tool, smooth the tape to the vinyl, removing any air bubbles. The transfer tape should overlap the backing of the design, so that you can stick the tape to an object with the backing still on the design.

DIY Nautical Bachelorette Party Flasks #bachelorette #cricutprojects #shipfaced #feelingnauti

4. Now, transfer the design to your flask. If you are comfortable centering the designs you can remove the tape from the backing and directly place the design on the flask. If not, arrange the design to be centered on the flask before removing the backing, sticking it with the overlapping transfer tape.

5. Once your design is placed to your satisfaction, carefully peel the tape off the backing, transferring the vinyl to the transfer tape while not unsticking it from the flask. Remove the backing then smooth the design onto the flask, once again using the smoother to remove any air bubbles. I found it pretty easy to simply lift the design and transfer directly, as shown in teh photos below. Since the designs are not symmetrical, I simply aligned it to the center “block” of the transfer tape then made sure that the top of the transfer tape followed the top of the flask, as shown below.

DIY Nautical Bachelorette Party Flasks #bachelorette #cricutprojects #shipfaced #feelingnauti

6. Remove the transfer taper to leave the design on the flask, then repeat the process for all the additional flasks.

DIY Nautical Bachelorette Party Flasks #bachelorette #cricutprojects #shipfaced #feelingnauti
DIY Nautical Bachelorette Party Flasks #bachelorette #cricutprojects #shipfaced #feelingnauti

And now you have some cute and nautical bachelorette flasks for your favorite girls to help celebrate! :)

DIY Nautical Bachelorette Party Flasks #bachelorette #cricutprojects #shipfaced #feelingnauti

 

 

DIY Heart Bridesmaid Flasks

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

How to DIY your own Bridesmaid Wedding Flasks with Free Cut Files! #cricut #diywedding #flasks #bridesmaid

With all the fun I had making the Groomsman Mustache Flasks, I couldn't leave the Bridesmaids out of the shinanigans! These Heart flasks are a simple and understated way to invite your bridesmaids to your wedding party or to use as a bachelorette favor or wedding gift! And of course I included one for the Bride so that all the wedding ladies can celebrate together!

How to DIY your own Bridesmaid Wedding Flasks with Free Cut Files! #cricut #diywedding #flasks #bridesmaid

The only difficult part of this project is to make sure some of the smaller pieces of vinyl don't get removed while weeding the letters from the heart (like the middle of the "e's" and "d's") so take your time on weeding the design and cut a couple extras if you are nervous! :)

How to DIY your own Bridesmaid Wedding Flasks with Free Cut Files! #cricut #diywedding #flasks #bridesmaid

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save.  

2. Cut the design(s) in your choice of permanent adhesive vinyl with the Vinyl Setting on your Cricut. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit the flask the way you like.

How to DIY your own Bridesmaid Wedding Flasks with Free Cut Files! #cricut #diywedding #flasks #bridesmaid

3. Once the designs are cut, weed away the extra vinyl and cut a piece of transfer taper to 4" x 3.5". I recommend using a transfer tape with 1/2" gridlines such as the Cricut brand tape as it makes it much easier to precisely transfer to the flasks. Cut away any excess backing and smooth transfer tape over the design, aligning it so that the  middle on the long side of your transfer tape is centered along the middle of the heart, with the bottom of the heart at the bottom of the transfer tape, as shown below. Using the smoother tool, smooth the tape to the vinyl, removing any air bubbles. The transfer tape should overlap the backing of the design, so that you can stick the tape to an object with the backing still on the design.

How to DIY your own Bridesmaid Wedding Flasks with Free Cut Files! #cricut #diywedding #flasks #bridesmaid
How to DIY your own Bridesmaid Wedding Flasks with Free Cut Files! #cricut #diywedding #flasks #bridesmaid

4. Now, transfer the design to your flask. If you are comfortable centering the designs you can remove the tape from the backing and directly place the design on the flask. If not, arrange the design to be centered on the flask before removing the backing, sticking it with the overlapping transfer tape.  I aligned mine such that the middle of each heart was centered on the top cap of the flask and the top of the transfer tape ran along the top edge of the flask, as shown in the photos below.

How to DIY your own Bridesmaid Wedding Flasks with Free Cut Files! #cricut #diywedding #flasks #bridesmaid

5. Once your design is placed to your satisfaction, carefully peel the tape off the backing, transferring the vinyl to the transfer tape while not unsticking it from the flask. Remove the backing then smooth the design onto the flask, once again using the smoother to remove any air bubbles.

How to DIY your own Bridesmaid Wedding Flasks with Free Cut Files! #cricut #diywedding #flasks #bridesmaid

6. Remove the transfer taper to leave the design on the flask, then repeat the process for all the additional flasks.

How to DIY your own Bridesmaid Wedding Flasks with Free Cut Files! #cricut #diywedding #flasks #bridesmaid
How to DIY your own Bridesmaid Wedding Flasks with Free Cut Files! #cricut #diywedding #flasks #bridesmaid
How to DIY your own Bridesmaid Wedding Flasks with Free Cut Files! #cricut #diywedding #flasks #bridesmaid
How to DIY your own Bridesmaid Wedding Flasks with Free Cut Files! #cricut #diywedding #flasks #bridesmaid

 

 

Bridesmaid Proposal Wine Labels

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

Bridesmaid Wine Label Pin.jpg

What Bridesmaids wouldn’t appreciate a bottle of wine to toast to the new wedding journey? I love the idea of giving a bottle of wine; it’s always appreciated and is not that expensive compared to the other bridesmaids invitation options out there. I must say I bought a bunch of swag for my maids to invite them, and while I don’t regret it in the least (they did A LOT of DIY) most people don’t want or need to drop a bunch of cash on their bridal party invitations.

Making these Bridal Party Invitations is very straightforward and turned out so cute! I would recommend wines in clear bottles for the labels to show to their best advantage, but you can use them on most any wine bottle you like!

Finished Label Pin 2 with text.jpg

Supplies:
Wine Bottle Labels
Wine Label Printable
Wine of Choice

1.     Download the Printable and Print your labels. I have made them specifically for Chardonnay wine bottles but you can always use something else and not use the top strips. :)

Supplies with text.jpg

2.     Soak off the Label from your wine bottles with hot soapy water. Scrub any remaining residue off with a sponge and dry the outside of the bottles.

3.     Peel off the label and affix it to your cleaned bottle. I found the edge of the bottle and used the vertical line to line up my label so it would be level.

Labelling Collage.png
finished labels no gems.jpg

4. If using the Chardonnay labels, wrap them around the top where the foil meets the bottle.

Chardonnay Collage.png

5.     Optional: Glue on a few clear and pink gems to give your bottles some extra sparkle! I just used regualr tacky glue and some extra gems I had lying around from previous bachelorette parties. :)

This is a wonderful way to invite your maids and it really only costs as much as the wine and a set of labels. Want to design your own labels? The company that created these label sheets has an online design studio so you can always come up with a design all your own!

D.I.Y. Wood Wick Teacup Candles

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

There is nothing that adds a fun vintage flair to a shower quite like these teacup candles. And they are so versatile! I will be using them for a Beauty and the Beast themed bridal shower, but they could just as easily be used for a tea party, Jane Austen Shower, or Mother’s Day Brunch!

Teacups Favor with text.jpg

For me, the wood wicks were a requirement on this batch, they just remind me so much of a fire in the hearth, and for a Beauty and the Beast Shower, it is the perfect touch since most of the story takes place in the winter where crackling fires are most welcome! In addition, the teacups are the perfect ode to my favorite characters, Mrs. Potts and Chip!

I have wanted to make these candles for a while but was always discouraged for one reason, finding the teacups! While you can find teacups at yard sales and estate sales, I could rarely find them and when I could, they were $10+ per cup! Luckily, I had the thought to check Etsy for teacups and I was not disappointed! :)

I was very impressed with the Etsy shop, The Acerage, which I purchased my teacups from. First, they were half the price I see at estate sales for the same cups due to what they term “minor damage.” So when I received them I was expecting some stains, chips, or even small cracks. Imagine my surprise when all the cups that came not only were in great condition (I could hardly find any chips), but they were in fact much better than the aforementioned teacups I paid double for at the estate sale! I have linked in the supplies the set I used, which are great to make a whole set of candles for shower favors. When someone orders them, the listing will disappear but as soon as they gather the next set they list it again.

If giving the teacups as a favor is not quite in your budget, use them as bridal shower prizes and only make a couple! I have been using them for the last couple showers I have gone to as prizes for games and they have been beloved by all!

 

Supplies:  

Mismatched Teacups and Saucers
Wooden Candle Wicks
Candle Wax*
Candle Pouring Pot
Powdered Candle Dye
Essential Oils for Scent

*I used leftover candle stubs, but the wax linked here will make about 20 -8oz teacup candles

1.  Melt wax on low heat in your pot. If, like me, you are using candle stubs, remove the wicks from the old candles once the wax is completely melted using either tongs or a fork.

2. For these candles, the full wax wick is far too long. Insert the wood wick into its metal stand and place in the cup. Cut the wicks at the top of the teacup with a pair of scissors, then remove the candle wax from heat and soak them in the wax for 10 minutes. Soaking these wicks is VERY IMPORTANT, they are not like the standard wicks that are already coated in wax and not soaking them will lead to the candles not staying lit.

3. Once wicks have been soaked, remove them with tongs or a fork. Once they are cool enough to handle (I was able to touch them immediately) insert them into the metal holder stands included and let dry.

4. Now, attach the wicks to the bottom of your teacups by dipping the metal holder into the melted wax, then position at the bottom of the jar. 

5. Let the wax cool for a couple more minutes, then add color and fragrance of your choice. The ones I have recommended are great for candles, bath bombs, soaps, and bath salts, so you can get a lot of use out of them! I made pastel pink, purple, and yellow candles that were scented as peppermint-lemon, lavender-lemon, and rosemary-lemon (I know you can't tell that I like lemon).

pouring candles.png

6. Pour cooled (but still liquid) wax into the teacups. Reserve about 25% of your wax to remelt and top off your candles if a divot is created in the middle due to the wax cooling. The cooler the wax is, the less of a divot will form. Some of mine with the cool wax needed no additional wax to fill in, while the ones where I started with hot wax needed a lot of extra to make them look nice!

7. Once candles are cooled and solidified, remelt the excess wax and fill in any divots that were caused during the first pour. Now you have a lovely set of candles for your home or favors for your next party!

These have been by far one of my favorite DIY projects I have done lately and a project I have wanted to do for a long time! Now I just need to find homes for all the teacups I can’t keep, time for a tea party! :)

Bride Tribe Tumblers

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

If there is one thing I love making for Bridal Parties, it is Tumblers! They are so cute and so useful for getting ready gifts, bachelorette party favors, or even to ask your maids in the first place.

For these tumblers, I was looking for a free dream catcher file for a more unique “Bride Tribe” tumbler, but none of them were suiting my fancy. Then I found this amazing one on Etsy! For a couple bucks it was well worth the price! Better yet, its an SVG file which are super easy to import into the Cricut Craft Cutter software.

For these tumblers and many of the wedding and bridal projects you will see on this blog, having a Cricut is required. I can’t say enough good things about mine, I wish I had had it when I was crafting for my own wedding! It would have saved me hours of work and many of the projects I did would have turned out even better! If you are a crafter, a bride, or even part of the bridal party I would highly recommend one, the one-time purchase will serve you well. :) Not only can you make tumblers like these, but you can also use it for custom cut invitations, iron on clothing, paper crafts, and removable vinyl wall decorations. I could go on and on but needless to say they are awesome!

Supplies:

Gold Adhesive Vinyl
Metallic Teal Adhesive Vinyl
Transfer Paper
Purple Tumblers
Craft Cutter and Tool Set
Adhesive Mat
Dream Catcher File
Bride File
Bride Tribe File

 

1.     Download the Dream catcher File and import into the Cricut software. You can do this by going to the software; and, after making a new project, click the upload button. Import the file, the click Continue.

Cricut 1-2

2.    Press save for the file to be uploaded to the software, then click the image under the Upload Tab. Select Insert Images" to insert it into the current project.

Cricut 3-4

3.     Size the dream catcher to 3.25” wide, then remove the unneeded cuts. For this image, ungroup the cuts using the button on the upper right.

Cricut 5

4.     Now, select each of the first 5 cuts and press the red "x" on the image to remove it.

Cricut 6-8

5.     Once the excess cuts are removed, copy and paste the number of dream catchers you need then click the "Make it" Button in the upper right. You can get up to six dream catchers per 12” x 12” sheet of vinyl. Press Continue to got to the cut Screen. On the Cricut itself, set the dial to "Vinyl", load the mat with Gold Vinyl, and press the Cricut button to cut.

Cricut 9-10

6.     Similarly, import the “Bride” and “Bride Tribe” pictures into the software, sizing them to be 2.5” tall. Cut these out in the Metallic Teal Vinyl.

7.     Remove the excess vinyl (known as weeding) until just the images and words you want to transfer are remaining.

8.     Cut away the excess backing around your vinyl designs. Fix them to the vinyl mat based on how you would like them to transfer onto the tumbler. As you can see from mine, I nested the “Bride Tribe” words into the bottom right of the Dream Catcher.

vinyl arrangement

9.     Cover the design with transfer paper. Push out all the air bubbles and press it into the design, such that when you lift the transfer paper the design comes up with it without its backing. I prefer the lined transfer paper as it makes it easier to orient the designs on their final resting places.

transfer paper

10.     Starting at the top of the tumbler, line up and press the transfer paper onto the tumbler, working top left to bottom right. Because it is curved, it will not stay exactly parallel with the top, this is ok! Pres the transfer paper as flat as you can against the tumbler, rubbing the design especially to get out any air bubbles. Lift the transfer paper, leaving the design on the tumbler.

Bride Tribe Tumbler

11.     For the Bride Tumbler, I wanted the letters to overlap the Dream Catcher. So the same steps as above are followed, but you first transfer the dream catcher, then the test as two separate transfers.

Bride Tumbler

Using these basic instructions, you can also design whatever tumbler you like to make your own custom tumblers for you, your bride, or your wedding party (if you are the bride!).

DIY Mean Girls Bachelorette Tumblers

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

Mean Girls Tumbler Title.jpg

If you’ve ever been on Etsy, there are so many cute and creative tumblers you can get for your bridal party! These tumblers were by far the favorite and most useful item I made for our Mean Girls Bachelorette Party. Since we had it in Las Vegas, we could easily fill them with any drink we wanted from the rooms and take them around with us as we walked the Strip and through all the different hotels and casinos. After the party is long gone, I still use mine all the time for iced coffee for work, so they make an excellent take home favor!

Once again, with a craft cutter this project becomes incredibly simple and can be customized to anything your heart desires! In addition to that, making them yourself will cost you significantly less than ordering them premade. :)

Note: This page may contain affiliate links, meaning that if you click on the link and buy the product, I will receive a small commission. This will not change your cost at all and I only recommend products I use and love!

Supplies:
Pink Tumblers
Silver Glitter Vinyl
White Vinyl
Grid lined Transfer Tape
Craft Cutter and Tool Set
Adhesive Mat

1.     Clean and dry the tumblers.

2.     Design your names: I used Pic Monkey to make both the names and titles for the Tumblers. The name is made with the Lavanderia font and the title was made with the Didact Gothic font. For the Bride I used the title “The Queen Bee” and the Bridesmaids were called “The Plastics” in true Mean Girls fashion. J You can use the design feature in PicMonkey to place text and save as a picture, which I find to be far easier than using the Cricut Design software to make the text as it tends to make the software run slowly.

Note: The Lavanderia Font is only part of PicMonkey Premium, which I use for some of my party designs and photo editing. You can do both monthly or yearly billing for it, and both are very inexpensive! :)

3.     When I made the names and titles, I made all the words the same size and part of the same picture (Names were one picture, titles were another picture). This will help with keeping them all the same size for the cutting phase. Once you have saved your text as pictures, upload them into the Cricut (or other cutter) design software. I made the longest name about 6 inches long. Cut the names out in Silver Glitter Vinyl.

Cameo 3 Bundles by Expressions Vinyl

4.     Next, import the titles into the design software. Using the names as they are sized, size the titles so that they fit nicely under the names (I did this by feel). Once you have your titles sized, delete the name picture and cut the titles out in white vinyl.

5.     After weeding the excess vinyl from the designs, cut the excess backing away from the text as much as possible. Using the sticky mat that goes with your cutter, arrange the white text under the name.

6.     Lay transfer tape over the text, aligning the gridlines under the name so that everything stays straight.

7.     Transfer the vinyl to the tumbler. Having gridline tape is very helpful here as you can use it to make sure that your text is perpendicular to the bottom of the tumbler. Press the vinyl onto the tumbler and remove the tape, and then you’re done!

Yes, that does feel like a lot of steps, but once you get the hang of it it takes no time at all! The big time crunch came in picking a font and designing the names, once I had the vinyl cut the transfer process took maybe 5-10 minutes a tumbler. Leave any questions you have in the comments!