Future Mrs. Just Engaged Skinny Tumbler

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

If theres’ a gift I like making for my newly engaged friends, its got to be tumblers! I’ve been having so much fun designing different decals for skinny tumblers lately, I decided to start off my tutorials for them with Just Engaged Tumbler! This “Future Mrs.” Skinny Tumbler is perfect as a work water bottle and the font is very well suited to the Glitter Permanent Vinyls.

For my tumbler, I used Silver Glitter Vinyl for the decal and I love how they turned out! While you have to be careful as far as the dot on the end of “Mrs.” this project is easy to weed and a fun first project for any new soon to be bride!

Supplies:
Skinny Tumblers
Permanent Adhesive Vinyl
Transfer Paper
Craft Cutter and Tool Set
Adhesive Mat
Skinny Tumbler Design Cut File

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file, then select Save. 

2. Cut the design(s) in your choice of permanent adhesive vinyl with the Vinyl Setting on your Cricut. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can. :)

3. Once the designs are cut, weed away the extra vinyl and cut a piece of transfer tape to 2.5" x 7.5". Cut away any excess backing from the vinyl design and smooth transfer tape over the design, aligning it with the text and arranging it such that one set of the 1/2” blocks are along the bottom left edge of the “F",. as shown below. Using the smoother tool, smooth the tape over the vinyl, removing any air bubbles.

4. Now, transfer the design to your tumbler. Remove the tape and decal from the backing, making sure that the entire decal transfers to the transfer tape.

5. Arrange the design such that the line that you aligned to the “F” on your transfer tape is along to top edge of the lip of the tumbler, as shown below. Starting from the top and working down, trace the letters to smooth them onto the tumbler. Smooth the design to remove any air bubbles,. Remove the transfer tape from the tumbler, leaving the design on the tumbler.

6. Use the smoother tool or your finger to retrace the letters after removing the transfer tape to smooth out any additional air bubbles. Then you’re done! :)

DIY Bride Tribe Wine Glasses

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

Every bridal party could use some fun wine glasses, and given how popular our Bridesmaid Wine Glasses have been, I wanted to add to the collection with a lovely “Bride Tribe” addition! I made these with two different options for the bride, either “Future Mrs.” or “The Bride” to go with your maids Bride Tribe Glasses.

I made these in Oracal 651 Gold Vinyl, which worked well and was easy to weed the small designs, but it never hurts to cut a couple extra decals if you are new to weeding vinyl or working with curved surfaces. In addition, its easiest to smooth the design from the middle to the top, then middle to the bottom to deal with the curvature of the glass.

Supplies:
Wine Glasses
Permanent Adhesive Vinyl
Transfer Paper
Craft Cutter and Tool Set
Adhesive Mat

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. 

2. Cut the design(s) in your choice of permanent adhesive vinyl with the Vinyl Setting on your Cricut. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit another sized glass than the ones we recommend. :)

3. Once the designs are cut, weed away the extra vinyl and cut a piece of transfer taper to 3" x 3.5". Cut away any excess backing from the vinyl design and smooth transfer tape over the design, aligning it along the bottom of the arrow, as shown below. I also aligned mine so that four sets of the 1/2” blocks on the transfer tape were above the arrow so the it was easy to align on the glass.Using the smoother tool, smooth the tape to the vinyl, removing any air bubbles.

4. Remove the transfer tape, making sure that the whole of the design transfers from the vinyl backing to the transfer tape.

5. Now, transfer the design to your glass. align the top of the transfer tape to the lip of the glass, as shown below. Smooth down the middle of the transfer tape to about the middle of the design, then smooth the design around the curve of the glass from the middle of the design to the edges. I started with the heart in the middle of the arrow and smoothed outward. Smooth any air bubbles out of the vinyl, but don’t worry about the crinkling of the transfer tape with the curved surface.

6. Remove the transfer tape to leave the design on the glass. Any additional bubbles in the design can now be smoothed out with either your fingers or the smoother tool. Repeat the process with all remaining wine glasses.

And now you have the perfect wine glasses to celebrate with your maids or to use while you DIY or do other wedding planning activities! Looking for more wine glass fun, check out out other Wine Glass Projects here!

DIY Honeymoon Hubs and Wifey Shirts and Tank Tops

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

What better way to celebrate your new married status on your honeymoon than with some super cute Hubs and Wifey shirts! I made two different designs, Wifey and Wifey for Lifey, because I couldn’t decide which one I liked more. Plus it never hurts to have options so you can pick your favorite too!

I made them on both Tshirts and Tank tops, mainly because I like tank tops and the hubs like Tshirts, so when we wear them they will already be our favorite kind of top! :) It’s kinda hard to see in the pictures, but I made the Wifey and Wifey for lifey decals in Rainbow White Glitter HTV and it is just the right amount of sparkly! The Hubs is not so into glitter (fair) so he got Easyweed Black HTV. :) These are great projects for beginners, nice big decals that are easy to weed and can take some heat while you are figuring out all the fun of iron on decals! :)

Supplies:
Blank Tank Tops or TShirts (Womens or Mens)
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat
Tank Top Design Cut Files

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit the tank tops and t-shirts the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design(s) in your choice of heat transfer vinyl (I used White Rainbow Glitter HTV and Easyweed Black HTV) with the Iron On (for Easyweed Vinyl) or Iron On+ (for Glitter Vinyl) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.

4. Iron your tank top/Tshirt to remove any creases, then center the design over the top half of the tank top. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

5. Set your Iron to the second Highest setting and press the the iron down firmly on the design, not ironing but rather using it as a small heat press. I worked from the upper left to lower right on the design, pressing the iron on each part of the design for at least 20-30 seconds, then overlapping the last position as you move the iron across the design.

6. Remove the backing from the design, leaving the design on the tank top. Repeat with all the remaining tops.

Looking for more fun Tank top and T Shirt Designs? Check out our other Tank Top and TShirt Tutorials Here!

DIY Drunk in Love HTV Iron On Koozies

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

Nothing like a set of matching koozies to get your bachelorette party started on the right foot (or in this case, with the right drink!). To go with our Drunk in Love Bachelorette T Shirts, I decided these cute little koozies were just the thing!

I made them in Old Gold Glitter HTV and Confetti Glitter HTV on black, white, and pink koozies but I think the black with Confetti Glitter HTV are my favorite! Despite the small lettering, I didn’t have any problems weeding the designs, but keep a lookout for the little pieces to make sure they don’t come off in the weeding process (such as the openings for the k’s and s’s).

Supplies:
Blank Koozies
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat
Koozie Design Cut Files

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit the koozies the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design(s) in your choice of heat transfer vinyl (I used Old Gold Glitter HTV and Confetti Glitter HTV) with the Iron On (for Easyweed Vinyl) or Iron On+ (for Glitter Vinyl) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.

4. Center the design in the middle of the koozie. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

5. Set your Iron to the second Highest setting and press the the iron down firmly on the design, not ironing but rather using it as a small heat press. The koozie design should be completely covered by the iron. Pressing the iron on the design for 15 - 30 seconds, mine took only 20 seconds. :) I’m always a little nervous ironing koozies, so I check them every 5 second or so until the design has transferred. :)

6. Remove the backing from the design, leaving the design on the koozie. Repeat with all the remaining koozies.

I always love koozies for using up extra bits of HTV and they are the perfect accessory to any bachelor or bachelorette party! Check out more of our Koozie Projects here!

DIY Welcome to Our Wedding HTV Iron on Tote Bags

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

When you have guests from out of town flying in for your wedding, it is always nice to give them a little wedding welcome bag with snacks, water, and an itinerary for the wedding festivities! If you are having a beachy destination wedding, tote bags are a great choice! Not only are they great for holding any goodies you want to give your guests, but they can be used throughout your guest’s vacation to hold towels, flip flops, and all their beach accessories.

For my first wedding welcome tote, I went with something cute, girly, and simple. After all, sometimes simple is best and this tote can be used for any out of town wedding guest bag, not just a beach. :) I used Easyweed Silver HTV for these bags, but you could easily make them any color you like to match your wedding’s theme! :)

Supplies:
Blank Tote Bags
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat
Tote Bag Design Cut Files

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit the tote bags the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design(s) in your choice of heat transfer vinyl (I used Silver Easyweed HTV) with the Iron On (for Easyweed Vinyl) or Iron On+ (for Glitter Vinyl) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.

4. Iron your tote bag to remove any creases, then center the design in the middle of the tote. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

5. Set your Iron to the second Highest setting and press the the iron down firmly on the design, not ironing but rather using it as a small heat press. I worked from the upper left to lower right on the design, pressing the iron on each part of the design for at least 30 seconds, then overlapping the last position as you move the iron across the design.

6. Remove the backing from the design, leaving the design on the tote bag. Repeat with all the remaining tote bags.

Check out more of our Tote Bag Projects Here! :)

DIY Getting Ready Bridal Party Tank Tops

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

Having matching getting ready gear with your bridesmaids is always a fun way to start your wedding day and makes for some super fun wedding preparation photos! :) With that inspiration this set of tank tops came to be! I love the ability to make these myself because it makes them so much cheaper than buying them! These cost $5-6 a piece depending on what tank tops you use, which is great since funds always tend to get tighter near the end of your wedding planning. :)

For this set, I made tank tops for the Bride, Bridesmaids, Maid of Honor, Mother of the Bride, and Mother of the Groom so that all the ladies getting ready with you can have one! :) I made the Bridesmaids and Maid of Honor Decals with Old Gold Easyweed HTV, the Mother’s decals with Pink Easyweed HTV, and the Bride’s with Rose Gold Glitter HTV.

These tank tops are super pretty and super easy to make for your big day! :) You can also check out our other Tank Top Projects Here!

Supplies:
Blank Tank Tops
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat
Tank Top Design Cut Files

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit the tank tops the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design in your choice of heat transfer vinyl (I used Gold Confetti Glitter HTV) with the Iron On (for Easyweed Vinyl) or Iron On+ (for Glitter Vinyl) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.

4. Iron your tank top to remove any creases, then center the design over the top half of the tank top. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

5. Set your Iron to the second Highest setting and press the the iron down firmly on the design, not ironing but rather using it as a small heat press. I worked from the upper left to lower right on the design, pressing the iron on each part of the design for at least 30 seconds, then overlapping the last position as you move the iron across the design.

6. Remove the backing from the design, leaving the design on the tank top.

Check out our other tank top projects here!

DIY Princess Inspired Bachelorette Wine Tumblers

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

With one of my best friends getting married and living in Florida, we are thinking about doing a bar crawl in the happiest place on earth, Disney World! Regardless of whether we do or not, it inspired me to design these adorable wine tumblers; all based on different fairy tale princesses!

I mixed and matched vinyl I already had, so a couple may not be perfect color complements or you may want to change it up to something different, but the combinations I used were:

Sipping Beauty - Oracal 651 Soft Pink Vinyl Dress with Gold Metallic Vinyl Lettering
A Whole New Buzz - Tiffany Blue Glitter Vinyl Dress with Gold Metallic Vinyl Lettering
Bibbity Bobbity Boozy - Tiffany Blue Glitter Vinyl Dress with Silver Glitter Vinyl Lettering
Drunkest of them All - Oracal 651 Gold Metallic Vinyl Dress with Amethyst Glitter Vinyl Lettering
Beauty and the Bottle - Oracal 651 Gold Metallic Vinyl Dress with Red Vinyl Lettering
Under the Influence - Oracal 651 Jade Vinyl Dress with Amethyst Glitter Vinyl Lettering

I tried transferring the designs in two ways, by transferring the dress first, then the lettering; and transferring the lettering to the dress before transferring it to the tumbler. It was far easier and cleaner to transfer the designs to the tumblers in layers as well as limiting the air bubbles from transferring and keeping the whole design smooth as its transferred to a curved surface.

Supplies:
Wine Tumblers
Permanent Adhesive Vinyl
Transfer Paper
Craft Cutter and Tool Set
Adhesive Mat
Stemless Wine Tumbler Design Cut File

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. 

2. Cut the design(s) in your choice of permanent adhesive vinyl with the Vinyl Setting on your Cricut. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can. :)

3. Once the designs are cut, weed away the extra vinyl and cut a piece of transfer tape to 3.5" x 5.5" for the dress decal and 3” x 3” for the lettering. Cut away any excess backing from the vinyl design and smooth transfer tape over the design, aligning it along the top of the dress, with one set of 1/2” blocks for ease with transferring later, as shown above. For the text, I didn’t align it to a specific piece, but rather centered the transfer tape over the design as best I could, since transferring it to the bottom of the dress isn’t a set position. Using the smoother tool, smooth the tape to the vinyl, removing any air bubbles.

4. Now, transfer the dress design to your tumbler. Remove the tape from the backing and smooth the dress onto the tumbler, aligning it along the top lip of the tumbler as shown below. It is easiest to start at the top and smooth from top to bottom, center to outside edges.

5. Remove the transfer tape from the tumbler, leaving the dress decal on the tumbler. If there are air bubbles (mine had some), smooth out the ones you can with the smoother tool and for smaller or hard to smooth bubbles, prick them with a needle and smooth them to remove them. :)

6. Now, transfer the lettering to you tumbler. Center the lettering on the bottom of the skirt of the dress, I actually didn’t have any problems aligning them since the lettering itself is staggered and made to fit inside the dress. The easiest way is to use the bottom of the dress as your guide and arrange the decal just above the bottom edge where all the letters will adhere to the dress, not the tumbler.

7. Trace the letters to smooth them onto the bottom of the dress on the tumbler, as shown above. Because the surface is curved, focus on the vinyl smoothly transferring than your transfer tape looking nice and neat. Once the design is set, remove the transfer tape from the tumbler, leaving the design on the tumbler. Repeat with all remaining tumblers.

I absolutely adore how these turned out and they are suprisingly easy to make once you’ve done one of them, so don’t be afraid! :) Take a look at our other Tumbler Projects Here! :)

DIY Wine Pun Bachelorette Tank Tops

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

What lucky brides out there are bar-crawling for their bachelorette? I’m all for a good bar crawl, having done one myself for my own bachelorette, so I designed a set of tank tops as an ode to my favorite of beverages, wine! :)

For these tank tops, I did a set of four based on Chardonnay, Moscato, Merlot, and Rose; mainly because I enjoyed the puns but also because they are some of my friend’s and I’s favorite wines! I also made a general one for the bride, because after all it is her party. :)

For the Black Tank tops, I used a Rose Gold Glitter HTV and for the Bride I used a Silver Glitter HTV and I love how they turned out! These are also easy designs for those who are still beginners to the weeding and HTV world, I had zero issues weeding or transferring them. :)

Supplies:
Blank Tank Tops
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat
Tank Top Design Cut Files

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit the tank tops the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design in your choice of heat transfer vinyl (I used Rose Gold Glitter HTV and Silver Glitter HTV) with the Iron On (for Easyweed Vinyl) or Iron On+ (for Glitter Vinyl) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.

4. Iron your tank top to remove any creases, then center the design over the top half of the tank top. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

5. Set your Iron to the second Highest setting and press the the iron down firmly on the design, not ironing but rather using it as a small heat press. I worked from the upper left to lower right on the design, pressing the iron on each part of the design for at least 20-30 seconds, then overlapping the last position as you move the iron across the design.

6. Remove the backing from the design, leaving the design on the tank top.

7. Repeat with all remaining tank tops! :) If you are ready to try more tank tops, check out our other tank top projects here!

DIY "This is my Wedding Crafting Glass" Stemless Wine Glass Tumbler

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

If there’s one thing I love to do for weddings, it’s craft for them! (So surprising given all the projects on this blog ) There’s nothing like pouring yourself a glass of wine and getting down to DIY-ing all your special details, gifts and decorations for your big day! To start your DIY journey off on the right foot, I made this adorable stemless wine tumbler to be used during those fun, but sometimes stressful, wedding crafting nights!

For my tumbler, I used Oracal 651 Pink Vinyl for my decal and I love how it turned out! While I had to be careful with the scissors, the rest of the design was easy enough to weed. It’s also worth noting that, since you are transferring to a curved surface, this project is slightly more difficult on the transfer, as the glass curves the words and scissors will get a little closer together than the original weeded design. It did so with my transfer and it still turned out great, as you can see in the above photo.

Supplies:
Stemless Wine Tumblers
Permanent Adhesive Vinyl
Transfer Paper
Craft Cutter and Tool Set
Adhesive Mat
Stemless Wine Tumbler Design Cut File

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. 

2. Cut the design in your choice of permanent adhesive vinyl with the Vinyl Setting on your Cricut. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can. :)

3. Once the designs are cut, weed away the extra vinyl and cut a piece of transfer tape to 3.5" x 4". Cut away any excess backing from the vinyl design and smooth transfer tape over the design, aligning it along the bottom of the text. Using the smoother tool, smooth the tape to the vinyl, removing any air bubbles. The transfer tape should overlap the backing of the design, so that you can stick the tape to an object with the backing still on the design. I aligned the transfer tape along the top of the “this is my” text, with one set of 1/2” blocks above to use in aligning it to your stemless tumbler later.

4. Now, transfer the design to your tumbler. Remove the tape from the backing and directly place the design on the tumbler. Arrange the design in the middle of the tumbler about an inch from the top of the lip of the tumbler.

5. Working from the middle to the edges, top to bottom, trace the letters with your fingers to smooth the design onto the tumbler. Because the surface is curved, focus on the vinyl smoothly transferring than your transfer tape looking nice and neat. I started in the top middle of the design, then would smooth the text, lifting the transfer tape from the tumbler and design as needed but never completely removing the transfer tape so that the alignment stayed consistent. Once the design is set, remove the transfer tape from the tumbler, leaving the design on the tumbler.

6. Finally, use the smoother tool or your finger to resmooth the design id needed and to remove the air bubbles, completing your new tumbler! :)

Write here… 

DIY Groomsman Bow Tie Flasks

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

Its been a while since I made the charming gents in your wedding anything, so I decided to make another round of flasks! :) And what better way to dress up flasks than with dapper bow ties!

These simple bow tie flasks are a great gift or proposal for your groomsmen, best man, and groom and are perfect for helping your boys celebrate and toast to your wedding day! I found the easiest way to keep the lettering and bow ties constant among all the flasks was to align it from the bottom and use the transfer tape as a constant spacer, as you will see below. :)

See more of our Flask Projects Here!

Supplies:
Flasks
Permanent Adhesive Vinyl
Transfer Paper
Craft Cutter and Tool Set
Adhesive Mat
Flask Design Cut File

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. 

2. Cut the design(s) in your choice of permanent adhesive vinyl with the Vinyl Setting on your Cricut. The SVG Files are sized so that they will automatically cut to the size you see in the photos.

3. Once the designs are cut, weed away the extra vinyl and cut a piece of transfer tape to 3.5" x 4". Cut away any excess backing from the vinyl design and smooth transfer tape over the design, aligning it along the bottom of the text with one of the 1/2” blocks below the text as show below. Using the smoother tool, smooth the tape to the vinyl, removing any air bubbles.

4. Now, transfer the design to your flask. Remove the transfer tape from the vinyl backing, transferring the vinyl design to the transfer tape.

5. Align the design on the flask from the bottom of the flask by centering the middle of the bow tie to the lid of the flask and aligning the transfer tape along the bottom, as shown below. Smooth the design onto the flask, once again using the smoother to remove any air bubbles.

6. Remove the transfer taper to leave the design on the flask, then repeat the process for all the additional flasks.

DIY Iron On HTV Drunk in Love Bachelorette Tee Shirts

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

If there’s one thing I love making for bachelorette parties, its tank tops and t-shirts! I adore everyone matching and it has an added bonus of making it easier to keep track of everyone. These T-shirts are perfect for any Bar Crawl Style Bachelorette, and were very easy to make. :) I made these in Confetti Glitter HTV and I love how they turned out, but I would be tempted to make them in the Rose Gold Glitter next time! :)

Supplies:
Blank Tee Shirts
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat
T-Shirt Design Cut Files

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit the t-shirts the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design(s) in your choice of heat transfer vinyl (I used Confetti Glitter HTV) with the Iron On (for Easyweed Vinyl) or Iron On+ (for Glitter Vinyl) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.

4. Iron your t-shirt to remove any creases, then center the design over the top half of the t-shirt, as shown above. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

5. Set your Iron to the second Highest setting and press the the iron down firmly on the design, not ironing but rather using it as a small heat press. I worked from the upper left to lower right on the design, pressing the iron on each part of the design for at least 20-30 seconds, then overlapping the last position as you move the iron across the design.

6. Remove the backing from the design, leaving the design on the t-shirt. Repeat with all the remaining t-shirts.

Check out our other TShirt and Tank Top Projects Here for more inspiration! :)

DIY Bride and Groom Toasting Flutes

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

Happy Post Valentine’s day everyone! Hopefully it was magical, romantic, and maybe even included a ring in the mix! To toast the celebration, well really to toast at your wedding, I designed these cute and simple wedding flutes.

I made my flutes in two colors, Silver Glitter Permanent Adhesive Vinyl and Gold Permanent Adhesive Vinyl and I loved how both turned out! By aligning the transfer tape well in the beginning, it makes the alignment on the glasses nice and easy. :) I would recommend this as a great first project for working with glassware in general, it is not a hard curve to follow as far as transferring goes and the designs themselves are simple and easy to weed. :)

Supplies:
Stemless Champagne Flutes
Permanent Adhesive Vinyl
Transfer Paper
Craft Cutter and Tool Set
Adhesive Mat
Flute Design Cut File

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. 

2. Cut the design(s) in your choice of permanent adhesive vinyl with the Vinyl Setting on your Cricut. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size to whatever you like. :)

3. Once the designs are cut, weed away the extra vinyl and cut a piece of transfer tape to 2" x 5". Cut away any excess backing from the vinyl design and smooth transfer tape over the design, aligning it to along the first letter of the designs with the bottom lines of the tape aligning to the text as shown below. Make sure to align it such that 1” of the transfer tape is to the left of the first letter to use in placing it properly on the glasses later.

4. After smoothing the transfer tape of the designs with the smoother tool, remove the transfer tape from the backing, lifting the design with the transfer tape.

5. Using the transfer tape as a spacer, smooth the design onto the flutes, aligning the short side of the transfer tape along the top edge of the glasses. I adhered mine as shown below. with the tape parallel to the top of the glass just under the rim.

6. Once the transfer tape is aligned along the top, smooth it onto the glass from top to bottom. I smoothed mine by tracing the letters from top to bottom until the entire design was smoothed onto the flute,as shown below.

7. Once the design has been smoothed and all air bubbles are removed, remove the transfer tape to leave the design on the flute. Repeat with the groom flute in the same manner. Using the transfer tape similarly to above you can make the groom flute lettering the same height so your flutes will be a beautiful and matching set! :)

DIY HTV Best Bridesmaid Ever Tote Bags

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

Who doesn’t love tote bags when it comes to Bridesmaid Gifts, they are so useful and perfect for overnight bags and storing toiletries and extras for your wedding day! To go with the other Tote Bags we’ve made, these Best Bridesmaid Ever Totes are great and affordable swag for all your girls!

In keeping with our Valentine’s Day Coloring right now, I made mine on Pink Tote Bags with Gold Confetti HTV but I would almost repeat the project with non glitter HTV to help with visibility on the bags in the future

I made a total of 4 different bags so you could have one for each of your leading ladies: bridesmaid, maid of honor, mother of the bride and mother of the groom. You can easily customize these for getting ready bags in whatever colors you like, and they are perfect for storing your girl’s clothes when the are getting ready and in their dresses for the wedding!

Supplies:
Blank Tote Bags
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat
Tote Bag Design Cut Files

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit the Tote Bags the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design(s) in your choice of heat transfer vinyl (I used Gold Confetti Glitter HTV) with the Iron On (for Easyweed Vinyl) or Iron On+ (for Glitter Vinyl) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.

4. Iron your Tote Bag to remove any creases, then arrange the design in the center of the tote bag, using the handles as a guide . Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

5. Set your Iron to the second Highest setting and press the the iron down firmly on the design, not ironing but rather using it as a small heat press. I worked from the upper left to lower right on the design, pressing the iron on each part of the design for at least 30 seconds, then overlapping the last position as you move the iron across the design.

6. Remove the backing from the design, leaving the design on the Tote Bag. Repeat with all the remaining Tote Bags.