DIY Honeymoonin' HTV Iron On Tank Tops

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

When you get married on the beach, you honeymoon on the beach! To end our week of Beach Wedding Projects, we are featuring a Honeymoonin’ Tank top for you to wear on vacation after your big day!

I made the decal with White Easyweed HTV but any color would come out great! This was an easy project to weed as well as being pretty forgiving on placement if you haven’t done a lot of HTV Projects before.

If you already have a Cricut, this project is also much more affordable than buying one, as with most of our tank tops. You can also check out our other Tank Top Projects Here!

Supplies:
Blank Tank Tops
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat
Tank Top Design Cut Files

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit the tank tops the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design in your choice of heat transfer vinyl (I used White HTV) with the Iron On (for Easyweed Vinyl) or Iron On+ (for Glitter Vinyl) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.

4. Iron your tank top to remove any creases, then center the design over the top half of the tank top. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

5. Set your Iron to the second Highest setting and press the the iron down firmly on the design, not ironing but rather using it as a small heat press. I worked from the upper left to lower right on the design, pressing the iron on each part of the design for at least 30 seconds, then overlapping the last position as you move the iron across the design.

6. Remove the backing from the design, leaving the design on the tank top.

Check out our other tank top projects here!

DIY Honeymoon Hubs and Wifey Shirts and Tank Tops

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

What better way to celebrate your new married status on your honeymoon than with some super cute Hubs and Wifey shirts! I made two different designs, Wifey and Wifey for Lifey, because I couldn’t decide which one I liked more. Plus it never hurts to have options so you can pick your favorite too!

I made them on both Tshirts and Tank tops, mainly because I like tank tops and the hubs like Tshirts, so when we wear them they will already be our favorite kind of top! :) It’s kinda hard to see in the pictures, but I made the Wifey and Wifey for lifey decals in Rainbow White Glitter HTV and it is just the right amount of sparkly! The Hubs is not so into glitter (fair) so he got Easyweed Black HTV. :) These are great projects for beginners, nice big decals that are easy to weed and can take some heat while you are figuring out all the fun of iron on decals! :)

Supplies:
Blank Tank Tops or TShirts (Womens or Mens)
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat
Tank Top Design Cut Files

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit the tank tops and t-shirts the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design(s) in your choice of heat transfer vinyl (I used White Rainbow Glitter HTV and Easyweed Black HTV) with the Iron On (for Easyweed Vinyl) or Iron On+ (for Glitter Vinyl) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.

4. Iron your tank top/Tshirt to remove any creases, then center the design over the top half of the tank top. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

5. Set your Iron to the second Highest setting and press the the iron down firmly on the design, not ironing but rather using it as a small heat press. I worked from the upper left to lower right on the design, pressing the iron on each part of the design for at least 20-30 seconds, then overlapping the last position as you move the iron across the design.

6. Remove the backing from the design, leaving the design on the tank top. Repeat with all the remaining tops.

Looking for more fun Tank top and T Shirt Designs? Check out our other Tank Top and TShirt Tutorials Here!

DIY Mr. and Mrs. Stemless Wine Glass Tumblers

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

I love getting just married swag for the honeymoon and then thought of these simple Mr. and Mrs. Stemless Wine Tumblers! They are just perfect for going to the beach and can easily be made for yourself or your friends who are getting married soon!

For my tumblers, I used Champagne Glitter Vinyl for the Mrs. and Oracal 651 Black Vinyl for the Mr. and I love how they turned out! This is a great beginner project if you aren’t used to transferring to curved surfaces, these tumblers are very easy to transfer to for this simple, bold design. And its super easy to weed! :)

Supplies:
Stemless Wine Tumblers
Permanent Adhesive Vinyl
Transfer Paper
Craft Cutter and Tool Set
Adhesive Mat
Stemless Wine Tumbler Design Cut File

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. 

2. Cut the design(s) in your choice of permanent adhesive vinyl with the Vinyl Setting on your Cricut. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can. :)

3. Once the designs are cut, weed away the extra vinyl and cut a piece of transfer tape to 2.5" x 3". Cut away any excess backing from the vinyl design and smooth transfer tape over the design, aligning it along the bottom of the text. Using the smoother tool, smooth the tape to the vinyl, removing any air bubbles. The transfer tape should overlap the backing of the design, so that you can stick the tape to an object with the backing still on the design.

4. Now, transfer the design to your tumbler. Remove the tape from the backing and directly place the design on the tumbler. Arrange the design in the middle of the tumbler about an inch from the top of the lip of the tumbler.

5. Working from the center to the edge of the design, trace the letters to smooth them onto the tumbler. Because the surface is curved, focus on the vinyl smoothly transferring than your transfer tape looking nice and neat. Once the design is set, remove the transfer tape from the tumbler, leaving the design on the tumbler.

6. Use the smoother tool or your finger to resmooth the design and to remove the air bubbles. Repeat with the Mr. Tumbler. :)

Write here…